Paver & Landscape Articles Post Your Article - It's FREE
December 15, 2018   
Lay a Path  February 09, 2006

Piergrossi and his crew built the path shown here at the home of Rich and Holly Mayes in Escondido, California. It replaced a narrow concrete sidewalk that led straight to the front door. The new path is wider and takes a few curves, forming generous planting pockets along the way.

There's just enough space between the stones for strips of groundcover to grow. Piergrossi used Mazus reptans, a Himalayan native. Other candidates include baby's tears, dwarf thyme, and Irish moss.

DESIGN: Tom Piergrossi Landscape and Nursery, Vista, CA (www.tompiergrossi.com or 760/598-4882)

Tools

* Spade

* Rake

* Hand tamper (available at rental yards)

* Two stakes, string, line level

* One or two 2-by-4s, at least 6 ft. long, to use as leveling guides

* Stone or brick chisel

* Safety goggles

Materials

* Gypsum or flour

* Decomposed granite (sold by the cubic yd.; 1 cubic yd., about $24, covers 160 square ft. to a depth of 2 in.)

* Compost

* Flagstone of regular thickness, about 1 1/2 to 2 1/2 in. thick (slabs are sold by weight; 1 ton, about $320, covers 100 to 120 square ft.)

* Groundcover (sold in nursery cell-packs or mud flats)

Directions

1. Outline the edges of the path with gypsum or flour. Measure the surface area of the path, then estimate the amount of decomposed granite, compost, and flagstone you'll need to buy.

2. Use a spade to excavate the soil between the lines to a depth of 4 inches; rake to smooth surface.

3. Spread a 2-inch layer of decomposed granite over the area; firm down evenly with a hand tamper.

4. To ensure that the path follows your lot's grade (essential for proper drainage), place stakes at each end, tie a string at paving-stone height between them, and attach a line level to the string.

5. Atop the decomposed granite, place pairs of flagstone slabs to act as guide stones; lay the flat side of a 2-by-4 on top of the slabs at the level of the string. Between these guide stones, arrange more flagstone pieces, using the 2-by-4 to keep an even level. Use chisel to break pieces to desired shapes (wear safety goggles), but don't make them too uniform--you want a rustic look. Allow a gap of 1/2 to 1 inch between pieces for planting seams.

6. After placing all stones, estimate in linear feet the amount of groundcover you'll need to fill the gaps. Then plant plugs from cell-packs or strips cut from mud flats; fill gaps with a mix of decomposed granite and compost. Water thoroughly.



Back to Articles >>

  Latest Articles

January 2008

September 2007

July 2007

June 2007

May 2007

March 2007

February 2007

January 2007

November 2006

October 2006

September 2006

August 2006

July 2006

June 2006

May 2006

April 2006

March 2006

February 2006

January 2006

December 2005

November 2005

October 2005

September 2005

August 2005
  More Resources

News/Press

Bookstore

Classified Ads

General Forum

Tradeshows

Associations

Industry Links

Request Info

If you're having any
Web site problems,
please report a bug