News/Press Releases Post Your News/Press Release - It's FREE
December 11, 2018   
March 16, 2007 

Keep the Equipment Fleet Productive and Profitable

Healthy equipment that runs efficiently and achieves top production is the hallmark of a profitable equipment fleet. To achieve this goal, equipment must be effectively maintained at the least possible cost. The following tips from John Deere Service Marketing Manager Diego Navarro will help equipment fleet managers accomplish maximum productivity and uptime while minimizing costs.

Condition-Based Maintenance

Condition-based maintenance is exactly what it sounds like—proactive maintenance procedures that are based on the condition of the machine. To provide maintenance, the technician reads the health of the machine and provides services based on that information. The most powerful technique used in condition-based maintenance is a complete oil analysis.
"With many inferior oil analysis tests out there, it's imperative to use one that will give you complete information," Navarro said.

Another technique commonly used in condition-based maintenance is root cause analysis, according to Navarro. "Any problem has three root causes," he said. "One of them obviously is human error—for example, using the wrong kind of oil. Then there's physical error—such as parts failure.

Administrative error also can play a part, such as the lack of written procedures or failure to schedule inspections. In short, if you don't find the reason the machine is failing, it will fail again. Root cause analysis helps us get to what is really causing the problem, so we can address it. It's treating the disease instead of just relieving the symptoms."

Particle Counts and Filtration

Filtration of the hydraulic system is important to extend the component life of any machine. The technician should initially determine the particle count by testing the fluid. Once that is done, a target particle count can be established, and then filtration can take place to reach that target.

"An on-site filtration caddy can clean the hydraulics very fast while you're performing other services," Navarro said. "Many dealers offer a range of filtration methods, including an on-site caddy, to help machine owners keep their equipment's systems healthy and clean. In some cases you may need to use bypass filtration, which is an aftermarket product. The bypass filter will take two or three weeks to reach that cleanliness."

Another technique, magnetic filtration, is effective for components such as axles. It is primarily used to capture iron particles. "Iron in big quantities damages bearings, oxidizes the oil and consumes the additive," Navarro said. "When you change oils, not all the iron goes out, so it's important to collect that iron using magnetic filtration."

Proper Lubrication

Lubricants are designed for a specific purpose, then are tested and developed with stringent quality control. During development, they are subject to a wide range of temperatures, pressures and more to determine how they will perform. As a result, mixing lubricants is a risk machine owners won't want to take.

"When your machine needs more oil, and you simply add any product you find instead of sticking with what's already being used in the machine, you are instantly changing the formulation," Navarro said. "This produces a new product that has not been tested, and it can often affect the machine negatively and accelerate wear, as these two lubricants aren't designed to work together."

One negative reaction that mixing lubricants can cause is copper generation. Copper comes from bronze, which is an alloy used in many high-pressure systems pumps. If copper is being leached from the pump's bronze, pump efficiency will suffer, and contamination of the entire system and components also will occur, according to Navarro.

"If excess copper shows up in your oil analysis, your Deere dealer can help you determine why the system is generating copper and fix the root problem," he said.

Electronic Machine Information Download on Excavators

One useful tool to maximize uptime and keep operating costs as low as possible is a system that allows for electronic machine download. Machines with this type of system can record up to 10,000 hours of operation information, from fuel consumption to pressures and temperature to percentage of use of the arm, bucket, swing and more. For example, this kind of data can be retrieved from John Deere excavators using a tool called Machine Information Center, Navarro said.

"Machine Information Center is vital to keeping costs in line," he continued. "It helps you determine how much time your operator spends idling or working, or when the way he is operating the machine is wearing out the tracks abnormally—it records just about everything about machine operation. The result is hours and hours of information that can really help the fleet supervisor manage cost and maintenance."

Back to News/Press Releases >> Source: Landscape Online
  Latest News/Press

January 2010

April 2008

January 2008

September 2007

July 2007

June 2007

May 2007

March 2007

February 2007

January 2007

November 2006

October 2006

September 2006

August 2006

July 2006

June 2006

May 2006

April 2006

March 2006

February 2006

January 2006

December 2005

November 2005

September 2005
  More Resources

News/Press

Bookstore

Classified Ads

General Forum

Tradeshows

Associations

Industry Links

Request Info

If you're having any
Web site problems,
please report a bug